$37 CHUNSHENN Motor Drives, CNC Stepper Motor Driver, Adjustable Ste Electronics Camera Photo $37 CHUNSHENN Motor Drives, CNC Stepper Motor Driver, Adjustable Ste Electronics Camera Photo Motor,Motor,Drives,,Adjustable,Ste,CHUNSHENN,$37,www.gracecounselingkc.com,/humlie101990.html,Driver,,CNC,Stepper,Electronics , Camera Photo CHUNSHENN Motor Drives CNC Cheap mail order specialty store Ste Stepper Adjustable Driver CHUNSHENN Motor Drives CNC Cheap mail order specialty store Ste Stepper Adjustable Driver Motor,Motor,Drives,,Adjustable,Ste,CHUNSHENN,$37,www.gracecounselingkc.com,/humlie101990.html,Driver,,CNC,Stepper,Electronics , Camera Photo
Please look for our brand "CHUNSHENN", purchase through other channels will not guarantee its quality.
Voltage: DC24~40 V
Drive current: 1.0~3.0A/phase 8 adjustable
Subdivision: The highest resolution is 25600 steps/rev. 16 level adjustable
High pulse frequency: 250 Kpps
1 * Motor driver
1. Do not reverse the power supply. Do not exceed the input voltage of DC40V. The green indicator light PWR lights when the drive is powered.
2. The input control signal voltage is 5V. When it is higher than 5V, the current limiting resistor needs to be connected. When the control signal voltage is 24V, a 2.2K 1/4W resistor should be connected in series.
3. The drive fault indicator is on. Please check the motor wiring and control signal line. If the motor is connected and other short-circuit faults, it needs to be restored after power-on.
4. SW4 to set the lock current function: ON=Full Current, OFF=Half Current. SW4 is set to OFF at the factory to make the motor and driver
Reduced heat and improved reliability. The current is automatically reduced by 50% at approximately 100 ms after the pulse train is stopped.
5. The driver has a single and double pulse selection function, which can be selected by the internal shorting bar. The factory default is pulse + direction.
All the info on our shipping methodsDiscover
Shop with confidence.
Secure 100% Checkout.
Send an email to firstname.lastname@example.org with your name and order number.
POGGIO A CAIANO (PO)
Via Vittorio Emanuele, 13
POGGIO A CAIANO (PO)
Via Vittorio Emanuele, 4R
Via Cavour, 3
Via del Papa, 26
Via Buia, 32